120mm copper heat exchanger radiator water cooler

120mm copper heat exchanger radiator water cooler -Copper core and acrylic ends -Liquid to air heat exchanger -RoHS compliant

120mm copper heat exchanger radiator water cooler

Specification

Dimensions	185 × 125 × 35mm (W×D×H)
Weight	455g
FPI (Fins per inch)	14
Materials	Copper fins and tubes, acrylic ends and stainless steel panel
Flat tube	12 sets 120 × 19 × 2mm (W × D × H)
Fin	13 sets 21 × 8mm (D×H)  4.5mm spacing
Colour	Glossy copper core and silver side-plate
Surface	Copper powder paint core
Certification	RoHS compliant
Ports	3 × G1/4’’(ID=11.4mm) , G3/8''(ID=14.95mm) or G1/2''(ID=18.63mm)
Included	30mm and 6mm 6-32 UNC screws
Fans required	1 or 2 120mm DC fans (not included)

Quality assurance: all radiators are cleaned to remove solder flux as well as pressure-tested for leaks.

Features

All copper core and louvered fin construction to make better heat dissipation performanceHigh quality acrylic top and bottom in acid resistance, corrosion resistance and heat resistanceHigh cooling performance at moderate noise levelBoth hydraulic and pneumatic tests(1.5 bar) to ensure the good function of brass plenum chambers3 options of the ports-G1/4'', G3/8'' or G1/2'' to meet your requirement

Support

- Installation derection

Vertical (inlet/ outlet at top): advisedVertical (upside-down): not advisedOn both sides: advisedHorizontal (either side): advised

- Installation precaution

If you use only a fan with 25 mm height, please use 30 mm long UNC6-32 screwsAlways double-check the screw length before installation, or you might poke a hole in the radiator water channels120mm × 120mm fans are advised to be installed with the radiator

Usage

The radiator could not only be used in CPUs, but also in medical or cosmetic devices, engines or any high-power machines.

TOP

BOTTOM

120mm copper heat exchanger radiator water cooler